Filtrete 4US-MAXS-S01 Guía de instalación descargar pdf (Pagina 6)

(Fig. 15)

(Fig. 16)

ATTACH THE FILTER:

You will need: lter (A)

1. Insert the lter (A) into the lter head (B).

2. Push lter up, then turn one quarter

of a turn to the right until it stops.

(Fig. 15)

3. When properly attached, there will

be NO gap between the lter head (B)

and the lter (A).

FILTER

REPLACEMENT

INSTRUCTIONS:

CAUTION

To reduce the risk of property damage due to

water leakage, replace ﬁlter every six months or sooner.

NOTE: You do NOT need to shut off your water supply

when changing your lter. The system will automatically

shut off the water supply while the lter is being changed.

REPLACING FILTER

1. Turn lter to the left until it releases from the lter head.

2. Gently pull lter down to remove.

3. Insert new lter into lter head, turn one quarter of a

turn to the right until it stops.

4. Open dedicated faucet to ush 2 gallons (approx. 4 minutes)

through the system before use. Water may start cloudy,

but will turn clear as the trapped air is released.

5. Activate lter change indicator according to instructions on page 8.

Replacement lters can be purchased at original point of sale.

Available lters include 4US-MAXS-F01 and 4US-MAXL-F01.

TURN WATER ON:

1. Turn the water back on at the

cold water shut-off valve. (Fig. 16)

2. Open dedicated faucet to ush 2 gallons

(approx. 4 minutes.) through the system

before use. Water may appear cloudy, but

will turn clear as the trapped air is released.

3. Check for leaks. If any dripping or leaking

occurs, turn cold water supply off, open both

faucets, tighten ttings and ensure that tubing is

pushed completely into ttings.

4. Activate lter change indicator according to

instructions on page 8.

YOUR SYSTEM IS NOW READY FOR USE.

tubing connections

should be reversed

tubing connections

should be reversed

1 2 3 4 5 6 7 8 9 10 11 ... 15 16

Comentarios a estos manuales

Sin comentarios

Filtrete 4US-MAXS-S01 Guía de instalación Pagina 6

Comentarios a estos manuales